Printer (computing)

In computing, a printer is a peripheral which produces a hard copy (permanent readable text and/or graphics) of documents stored in electronic form, usually on physical print media such as paper or transparencies. Many printers are primarily used as local peripherals, and are attached by a printer cable or, in most newer printers, a USB cable to a computer which serves as a document source. Some printers, commonly known as network printers, have built-in network interfaces (typically wireless and/or Ethernet), and can serve as a hardcopy device for any user on the network. Individual printers are often designed to support both local and network connected users at the same time. In addition, a few modern printers can directly interface to electronic media such as memory sticks or memory cards, or to image capture devices such as digital cameras, scanners; some printers are combined with a scanners and/or fax machines in a single unit, and can function as photocopiers. Printers that include non-printing features are sometimes called Multifunction printers (MFP), Multi-Function Devices (MFD), or All-In-One (AIO) printers. Most MFPs include printing, scanning, and copying among their features.

A Virtual printer is a piece of computer software whose user interface and API resemble that of a printer driver, but which is not connected with a physical computer printer.

Printers are designed for low-volume, short-turnaround print jobs; requiring virtually no setup time to achieve a hard copy of a given document. However, printers are generally slow devices (30 pages per minute is considered fast; and many inexpensive consumer printers are far slower than that), and the cost per page is actually relatively high. However this is offset by the on-demand convenience and project management costs being more controllable compared to an out-sourced solution. The printing press naturally remains the machine of choice for high-volume, professional publishing. However, as printers have improved in quality and performance, many jobs which used to be done by professional print shops are now done by users on local printers; see desktop publishing. The world's first computer printer was a 19th century mechanically driven apparatus invented by Charles Babbage for his Difference Engine.[1]
Read More.. Selengkapnya...

Read Users' Comments (0)

Joystick

A joystick is an input device consisting of a stick that pivots on a base and reports its angle or direction to the device it is controlling. Joysticks are often used to control video games, and usually have one or more push-buttons whose state can also be read by the computer. A popular variation of the joystick used on modern video game consoles is the analog stick.

The joystick has been the principal flight control in the cockpit of many aircraft, particularly military fast jets, where center stick or side-stick location may be employed (see also Center stick vs side-stick).

Joysticks are also used for controlling machines such as cranes, trucks, underwater unmanned vehicles, wheelchairs, surveillance cameras and zero turning radius lawn mowers. Miniature finger-operated joysticks have been adopted as input devices for smaller electronic equipment such as mobile phones.
Read More.. Selengkapnya...

Read Users' Comments (0)

Chapter 1. Basic Skills Using GNOME

1.1 Mouse Skills
1.1. c. Mouse Pointers

As you use the mouse, the appearance of the mouse pointer can change. The appearance of the pointer provides feedback about a particular operation, location, or state.

The following mouse pointers are shown as your mouse passes over different elements of the screen:
Note:

Your mouse pointers will differ from those shown here if you are using a different pointer theme. Your distributor or vendor may have set a different default theme.

Normal pointer. Normal pointer

This pointer appears during normal use of the mouse.
Busy pointer. Busy pointer

This pointer appears over a window that is busy performing a task. You cannot use the mouse to give this window any input, but you can move to another window and work with that.
Resize pointer. Resize pointer

This pointer indicates that you can grab the control to resize parts of the interface. This appears over the borders of windows and over resize handles between panes in a window. The direction of the arrows indicates in which direction you can resize.
Hand pointer Hand pointer

This pointer appears when you hover over a hypertext link, in a web page for example. This pointer indicates that you can click on the link to load a new document or perform an action.
I-beam pointer I-beam pointer

This pointer is shown when the mouse is over text that you can select or edit. Click to place the cursor where you want to type text, or drag to select text.

The following mouse pointers are shown when dragging an item such as a file, or a piece of text. They indicate the result of releasing the mouse button to drop the object being moved.

Move pointer. Move pointer

This pointer indicates that when you drop the object, the object is moved from the old location to the new location.
Copy pointer. Copy pointer

This pointer indicates that when you drop the object, a copy of the object is created where you drop it.
Symbolic link pointer. Symbolic link pointer

This pointer indicates that when you drop the object, a symbolic link to the object is created where you drop the object. A symbolic link is a special type of file that points to another file or folder. For more on this, see the section called Creating a Symbolic Link to a File or Folder.
Ask pointer. Ask pointer

This pointer indicates that when you drop the object, you will be given a choice of what to do. A menu will open to allow you to choose which operation you would like to perform. For instance, you may be able to move, copy, or create a symbolic link.
Not available pointer. Not available pointer

This pointer indicates that you cannot drop the object at the current location. Releasing the mouse button now will have no effect: the dragged object will be returned to its starting location.
Move panel object pointer. Move panel object pointer

This pointer appears when you drag a panel or a panel object with the middle mouse button. See Chapter 4, Working With Panels for more information on panels.
Move window pointer. Move window pointer

This pointer appears when you drag a window to move it. See the section called Manipulating Windows for more information on moving windows. (Next: Keyboard Skills)

.........................................................
GNOME Desktop Basic Skills
Table of Contents

1.1 Mouse Skills
1.1.a. Mouse Buttons
1.1.b. Mouse Actions
1.1.c. Mouse Pointers (You are here)

1.2 Keyboard Skills
1.2.a. Global Shortcut Keys
1.2.b. Window Shortcut Keys
1.2.c. Application Keys
1.2.d. Access Keys
Read More.. Selengkapnya...

Read Users' Comments (0)

Sound Is Energy

CRASH! BANG! Did you hear that sound? It was made by air vibrating. The same is true for sounds made by musical instruments. The difference between NOISE and MUSIC is that musical sounds are organized into patterns that have pitch and rhythm. Noise is just random, disorganized sounds. Sounds are made and travel in the same way whether they are musical sounds or noise.

A musical sound is called a tone, and is produced by air vibrating a certain number of times per second. These vibrations are called waves. These sound waves must be contained in some way so that the performer can control the loudness, quality of the tone, and how long it plays. Most musical instruments have a reed, a string, or some other device that creates sound waves when moved. Sounds are different because of harmonics, which are higher and quieter sounds mixed in. They are not heard separately, but add to the tone of the sound, making an oboe sound different from a trumpet or drum.

The number of times that a sound wave vibrates in a second is called its frequency. Scientists even have a name for how they measure the frequency of sounds. They measure it in cycles and call it hertz. High notes have a higher frequency than lower notes and this changes their shape. Different types of sound waves have different shapes. Look at these images to see what sound waves "look" like.

soundwave2.GIF (12001 bytes)

Notice that even if pitch and volume change, the shape of the sound wave stays the same.

Some instruments produce sound when blown into. For the brass instruments, the vibration of the player’s lips make the column of air vibrate. Most woodwinds have a reed, which vibrates when the player blows on it, making the column of air vibrate. Sound is produced from the flute when the player blows across the mouthpiece, causing vibration of the column. This image shows how the sound waves of different instruments might look.

soundwave3.GIF (6378 bytes)
PROJECT:

Wrap some stiff tissue paper around a comb. Hum on the paper and feel the vibration as it shivers. OR, tape some paper tightly over one end of a cardboard tube. Sing into the tube, gently touching the paper. Can you feel the vibrations? Try making your voice higher or lower, and notice the different types of vibrations.

The string section of the orchestra, such as the cello, violin and harp, produce sound when one or more of their strings vibrate. The vibrating strings then cause part of the instrument to vibrate, putting the surrounding air in motion. The strings of cellos and violins are usually stroked with a bow. With some instruments the strings are plucked, such as the harp or guitar.
PROJECT:

Wrap a rubber band around your fingers. Pluck it a few times. Can you see and feel the vibrations? The harder you pluck the rubber band, the more it will vibrate, creating a louder sound. If you stretch the rubber band, making it longer and thinner, what do you hear? (It will be a higher pitch.)

Other instruments produce sounds when struck, banged, shook or scraped. When the membrane (the stretched part) of a drum is hit, it vibrates and creates a sound. Instruments such as the xylophone or chimes, have a series of tubes or bars. When you strike one of the tubes or bars, a sound is produced.
PROJECT:

Tap an empty metal tin with a spoon. Feel it vibrate as it makes a sound. This is similar to playing a triangle. Fill an empty glass jar with water almost to the top. Take a pencil, and gently tap it near the rim. Fill other jars with different amounts of water in them. Do the jars sound differently? The more water in the jar, the lower the pitch, because the vibrations are slower.
Read More.. Selengkapnya...

Read Users' Comments (0)

Coded entry using your wristwatch


[Ziyan] and [Zach] built a door entry system that uses a code entered from your wristwatch. They’re using the TI eZ-430 Chronos that we saw in November. There is a project box mounted over the deadbolt lever. Inside, the wireless fob waits for the watch to connect. When a watch has connected and the correct code is received (using 128 bit encryption) the fob actuates a servo to turn the lock. On the user side of things the code is entered by tapping the watch. The built-in accelerometer picks up these taps and relays them to the door unit.

It’s a heck of a project! Check out their demonstration video after the break. We’d like to see a mechanical option for escaping the apartment in case the door unit fails but otherwise we think this is perfectly executed. We’re looking forward to seeing more projects that tap into this TI hardware. Read More.. Selengkapnya...

Read Users' Comments (0)

Spy on your office


[Garagedeveloper] sent us his custom surveillance system, part 1, part 2, and part 3 after needing a way to find out why some cables at work were becoming unplugged (spoiler, the cleaners were messing up the wiring). At the base of the system is a web cam glued to a stepper motor. However, it gets much more in depth with a web front-end that allows the user to stream the feed and control the position of the stepper. We’re not particularly fond of how many different parts the project takes, while it all could be accomplished under C# with ASP.NET and parallel port library instead of including Arduino and excess code, but to each their own and the project turned out a success anyway. Read More.. Selengkapnya...

Read Users' Comments (0)

Start the car with a wave of your hand


[Jair2K4] likes his RFID almost as much as he likes his chaw. Ever since his car was stolen he’s had to start it using a screwdriver. Obviously this is not a good way to leave things so he decided to convert his starter to read an RFID tag. He installed an RFID transponder he picked up on eBay, wiring it to the ignition switch. He’s removed the clutch-check sensor and wired a rocker switch to enable the RFID reader. We presume the rocker switch will eventually be used to shut the car off as well.

While most would have purchased a key-chain RFID tag, [Jair2k4] went far beyond that and had the tag implanted in his hand. This is an honor usually reserved for pets and until he adds RFID functionality to the door locks maybe a key fob would have been a better answer. But, to each his own. See his short demonstration video after the break. Read More.. Selengkapnya...

Read Users' Comments (0)

Russian billboard includes a “happy ending”

It seems someone hacked into one of LED billboards and added porn video clips to the rotation of advertisements. We caught a glimpse before YouTube yanked it. We’ve pixelated the shot above which already had some blackbox censorship from the OP but we assure you, it was hardcore porn.

The 9-by-6 meter billboard is in downtown Moscow. The AP is reporting that this caused something of a traffic jam and shocked passersby. We’ve seen porn before, but have to admit that even knowing what to expect in the video it was a bit shocking for us to see cars driving by a giant sex scene. This is certainly much more of a distraction than leaving clever messages on the side of the road.

Does anyone know what technology is used to update these billboards? We’re curious as to whether physical access to the unit is necessary for this kind of attack. Leave your insights in the comments.

[Thanks Sean] Read More.. Selengkapnya...

Read Users' Comments (0)

NES console to cartridge security in depth

[Segher] has reverse engineered the hardware and command set for the NES CIC chips. These chips make up the security hardware that validates a cartridge to make sure it has been licensed by Nintendo. Only after authentication will the console’s CIC chip stop reseting the hardware at 1 Hz. The was no hardware information available for these chips (go figure) so [Segher] had to do some sleuthing with the tools at hand which include some rom dumps from the chip pairs. He was nice enough to share his findings with us. We’re betting they’re not of much use to you but we found it an interesting read.

[Thank ppcasm] Read More.. Selengkapnya...

Read Users' Comments (0)

Buzzle: a morse code puzzle box


[lucasfragomeni] built the Buzzle after being inspired by the reverse geocache puzzle. The Buzzle was built as a gift to a friend. It’s a tricky gift too. His friend can’t open it until he decodes the words being displayed in morse code via an LED. A word is chosen at random, so you would have to decode it each time you want to open the box. That’s a pretty neat security feature. Sure it’s not the most secure, but it would keep casual peepers out. Unfortunately, the box was empty when his friend received it. Read More.. Selengkapnya...

Read Users' Comments (0)

Running bleeding edge on Nexus One


We like to run the newest software available. We often encounter problems and things that don’t work because of this, but with open source that just give you the opportunity to contribute and make the package better. Now you can take the fun and daring of bleeding edge to your phone by installing the latest Linux kernel on the Nexus One. [Jon Lech Johansen] wrote up that eight step process to install 2.6.32, which should take you just minutes if you already have the Android SDK installed. If you don’t what are you waiting for? Read More.. Selengkapnya...

Read Users' Comments (0)

Android G1 serial to Arduino


With the ability to get root access to some of these new powerful pieces of hardware we call cell phones, we’re a bit surprised we haven’t seen more interfacing with external hardware. Here’s an example of some rudimentary connections between an Android G1 and an Arduino. To do this, you must have your G1 rooted, have the Android SDK installed, and then a custom python program running. There is also a simple level shifter from 3.3v to 5v necessary for the connection to the Arduino. You can get all the details from the instructable. They’ve documented the process quite well adn we’re excited to see what kinds of stuff people come up with. Read More.. Selengkapnya...

Read Users' Comments (0)

Freerunner with Android, new case, battery


[Dennis] got snowed in after the biggest storm in the history of the state hit. Like any good hacker he didn’t let the time go to waste. He decided to dig out his Neo Freerunner to give it a decent battery and a new OS.

The original battery for the Freerunner has a controller board integrated into the package. [Dennis] pulled out the board and attached it to a portable DVD player battery. After running it through a discharge cycle with another hack of his, the board learned the new battery capacity. The larger battery plus a fast-charger from SparkFun required a larger case. He made it happen by combining a 2.5″ HDD case with the original body courtesy of some JB weld. The final portion of the hack was to load up Android which is as simple as untarring the package onto an SD card.

It’s a bit big, but the battery will last and he’s got an open platform. Nice work! Read More.. Selengkapnya...

Read Users' Comments (0)

Nexus One rooted


You know it’s getting a bit ridiculous when hardware that hasn’t hit the streets is being rooted. That’s exactly what has happened, root access can now be achieved on the Nexus One. [Paul] found an exploit and packaged it nicely so that anyone can do it. We do wish he had shared the details of the exploit but we’re not complaining.

If you’re not in the know, the Nexus One is the fabled Google Phone now come to life. It’s slated for release in 2010 and some think that will be officially unveiled at a January 5th press conference. That’s right, unveiled. The device has been cracked yet it doesn’t officially exist. What it does do is join a growing number of rooted android Read More.. Selengkapnya...

Read Users' Comments (0)

USB host mode for Droid


There’s a simple hack to use your Motorola Droid phone as a USB host. It is a hardware-only hack that doesn’t require you to crack open your phone, root it, or even to change firmware (although device drivers in the stock Android image may be quite limited). The dongle above is used as a key to enable the mode while the phone is booting. This was repurposed from a car charging cable by removing the wires and resistor and shorting the resistor pads. Once the phone is in host mode the dongle is swapped for a simple USB-mini to USB-A socket adapter, built from two cables you probably have lying around. Now you can plug in any device you want. Read More.. Selengkapnya...

Read Users' Comments (0)